DIESPOTTING PRESS
Me Series
▲ DSP1300M
Main specifications
| DSP1000Me | DSP1300Me | ||
| Pressing capacity | kN | 500 | 1000 | 1500 |
| Pulling ability | kN | 220 | 390 |
| Daylight | mm | 1000 | 1200 |
| Stroke length | mm | 920（850） | 1090（950） |
| Table dimensions | mm | 1000×700 | 1300×1000 |
| Bolster loading mold mass | kg | 3000 | 5500 |
| Adapter reversing upper mold mass | kg | 1500 | 2000 |
| Allowable upper mold mass | kg | 1500 | 2000 |
| Descending speed | mm/sec | 70 | 80 | 70 |
| Ascending speed | mm/sec | 64.9 | 74.8 | 69.7 |
| Traction motor Allowable upper mold mass | KW-P | 5.5-4 | 11-4 |
| Oil tank capacity | ℓ | 60 | 120 | 150 |
* This table slides.
Standard equipment
| DSP1000Me | DSP1300Me | |
| Eco mode | Inverter equipment | |
| Slide balance actuator | OP | |
| Slide own weight slow lowering device | 0〜3mm/sec | |
| Slide fall prevention device | Automatic locking at the maximum slide limit | |
| MB lock device | OP | |
| Sliding surface | Bellows made of steel plate for bed protection | Bellows made of steel plate for bed protection |
| Tool outlet | Air outlet right front 2 ports / electric outlet right front 2 ports | |
| Safety pole device | OP | |
| Die height indicator | OP | |
| Emergency stop button | 2 places (front right / front left) | |
| Room light | ||
* This table slides.
Standard options
| ・Formax try device | ・Hydraulic port for side core |
| ・Photo-electric safety device | ・Spotlight |
| ・Inverted die stopper | ・Aircraft front lighting |
| ・Alarm device | ・Jabala for main cylinder |
| ・Rack type Slide fall prevention device |
Special optionsParticular options
| ・Micro adjustment device | ・Lifting safety shutter |
| ・Shock absorber for punching | ・Dual hand operation panel (Stand type) |
| ・Hydraulic die cushion capacity | ・Slide equalizer device |
| ・Automatic Safety pole device | ・Touch panel colorization |
Me Series
▲ DSP2000Me
Main specifications
| DSP1600Me | DSP1800Me | DSP2000Me | ||
| Pressing capacity | kN | 1000 | 1500 | 2000 | 2000 | 2000 | 3000 |
| Pulling ability | kN | 400 | 400 | 470 | 470 | 470 |
| Daylight | mm | 1400 | 1600 | 1800 |
| Stroke length | mm | 1240（1100） | 1440（1300） | 1640（1500） |
| Table dimensions | mm | 1600×1200 | 1800×1200 | 2000×1500 |
| Bolster loading mold mass | kg | 8000 | 11000 | 16000 |
| Adapter reversing upper mold mass | kg | 3000 | 5000 | 7000 |
| Allowable upper mold mass | kg | 3000 | 5000 | 7000 |
| Descending speed | mm/sec | 90 | 90 | 90 |
| Ascending speed | mm/sec | 91.6 | 90.3 | 78.2 | 78.2 | 89.5 | 85.5 |
| Traction motor Allowable upper mold mass | KW-P | 15-4 | 15-4 | 18.5-4 |
| Oil tank capacity | ℓ | 150 | 200 | 200 | 250 | 250 | 320 |
* This table slides.
Standard equipment
| DSP1600Me | DSP1800Me | DSP2000Me | |
| Eco mode | Inverter equipment | ||
| Slide balance actuator | 0〜30mm/sec | ||
| Slide own weight slow lowering device | |||
| Slide fall prevention device | Automatic locking at the maximum slide limit | ||
| MB lock device | OP | |
Bolster Forced lock(Automatic ) |
| Sliding surface | Bellows made of steel plate for bed protection / | ||
| Tool outlet | Air outlet right front 2 ports / electric outlet right front 2 ports | ||
| Safety pole device | 2 places (front left / rear right) | ||
| Die height indicator | Use touch panel monochrome (current position display, deceleration position setting, arbitrary lower limit position setting) | ||
| Emergency stop button | 4 places (front right / front left / rear right / rear left) | ||
| Room light | Lighting in the press | ||
* This table slides.
Standard options
| ・Formax try device | ・Hydraulic port for side core |
| ・Photo-electric safety device | ・Spotlight |
| ・Inverted die stopper | ・Aircraft front lighting |
| ・Alarm device | ・Jabala for main cylinder |
| ・Rack type Slide fall prevention device |
Special optionsParticular options
| ・Micro adjustment device | ・Lifting safety shutter |
| ・Shock absorber for punching | ・Dual hand operation panel (Stand type) |
| ・Hydraulic die cushion capacity | ・Slide equalizer device |
| ・Automatic Safety pole device | ・Touch panel colorization |
Me Series
▲ DSP3500Me
Main specifications
| DSP2500Me | DSP3000Me | DSP3500Me | DSP4000Me | ||
| Pressing capacity | kN | 3000 | 3000 | 5000 | 3000 | 5000 | 3000 |
| Pulling ability | kN | 570 | 570 | 570 | 785 | 785 | 830 |
| Daylight | mm | 1800 | 2400 | 2700 | 2700 |
| Stroke length | mm | 1640（1500） | 2240（1800） | 2540（2100） | 2540（2200） |
| Table dimensions | mm | 2500×1500 | 3000×2000 | 3500×2500 | 4000×2500 |
| Bolster loading mold mass | kg | 21000 | 30000 | 50000 | 50000 |
| Adapter reversing upper mold mass | kg | 10000 | 15000 | 20000 | 20000 |
| Allowable upper mold mass | kg | 10000 | 15000 | 20000 | 20000 |
| Descending speed | mm/sec | 90 | 90 | 100 | 100 |
| Ascending speed | mm/sec | 90.1 | 94.1 | 87.7 | 100.3 | 90.5 | 80.2 |
| Traction motor Allowable upper mold mass | KW-P | 30-4 | 37-4 | 45-4 | 55-4 | 55-4 |
| Oil tank capacity | ℓ | 350 | 480 | 800 | 480 | 800 | 480 |
* This table slides.
Standard equipment
| DSP2500Me | DSP3000Me | DSP3500Me | DSP4000Me | |
| Eco mode | Inverter equipment | |||
| Slide balance actuator | 0〜30mm/sec | |||
| Slide own weight slow lowering device | ||||
| Slide fall prevention device | Automatic locking at the maximum slide limit | |||
| MB lock device | Bolster Forced lock(Automatic ) | |||
| Sliding surface | Bellows made of steel plate for bed protection / | |||
| Tool outlet | Air outlet right front 2 ports / electric outlet right front 2 ports | |||
| Safety pole device | 2 places (front left / rear right) | |||
| Die height indicator | Use touch panel monochrome (current position display, deceleration position setting, arbitrary lower limit position setting) | |||
| Emergency stop button | 4 places (front right / front left / rear right / rear left) | |||
| Room light | Lighting in the press | |||
* This table slides.
Standard options
| ・Formax try device | ・Hydraulic port for side core |
| ・Photo-electric safety device | ・Spotlight |
| ・Inverted die stopper | ・Aircraft front lighting |
| ・Alarm device | ・Jabala for main cylinder |
| ・Rack type Slide fall prevention device |
Special options
| ・Micro adjustment device | ・Lifting safety shutter |
| ・Shock absorber for punching | ・Dual hand operation panel (Stand type) |
| ・Hydraulic die cushion capacity | ・Slide equalizer device |
| ・Automatic Safety pole device | ・Touch panel colorization |